Having the right generator on hand is important. It can mean the difference between operating your home without interruption or going days without power. Avoid being stuck without lights, charging stations, and appliances by keeping a generator nearby for surprise outages. it’s not enough, however, to just have the right generator handy when a power outage occurs. You need to make sure your machine receives regular maintenance so it can continue to power through any challenge. Here’s how to change the oil in your Honda generator.
Before performing any repair or maintenance on a generator, turn the fuel valve on top of the fuel cap to off. This prevents any spilling, any leakage, or fire if the machine spills oil when it is tipped over.
To carry out this task, you’ll need:
- Flathead screwdriver
- Oil drain pan
- Rag
- Quart of Honda’s 10w30.
To change the oil in a Honda generator, run the generator to an operating temperature in order to ensure that everything drains properly. Running the machine also allows you to get a faster drain when you’re draining the oil.
Use the flathead screwdriver to remove the access panel on the side of the generator and gain access the oil. In the bottom left hand corner, you will see a cap, which also acts as an oil dipstick, oil fill, and oil drain.
To drain the oil from the generator, remove that cap. Tip the machine on its side and let the oil flow out into a drain pan. Once it’s done draining, tip the machine back upright and use your rag to clean up any excess oil that spilled on the housing.
Refill the generator with Honda 10w30. It is recommended to use 13.58 ounces to fill the machine or to add oil up to the very top level of the threads. Once you fill the machine to the proper level, push the dipstick in until it’s at the threads and pull it back out to see where the oil level is on the stick. Once you have the right oil level, screw the cap back into the threads. Again, use you rag and make sure any excess oil is cleaned off the generator before you put that access cover back on.
Put the access panel back on the side of the generator. Turn the machine on, turn the choke all the way to the on position, and turn the fuel valve back on. Start the generator and let it warm up for 10 to 15 seconds and then take the choke off. You’ll notice a green light on the front of the generator, which indicates that the generator is making voltage.
The generator is equipped with a low oil alert so if you ever run the machine low on oil it will shut itself down to save the engine. There is also a light on the front of the generator that indicates why the machine shut down so if the oil is low you will see a red light.
You May Also Enjoy These Articles:
Be Prepared for Storms – How to Choose a Generator
Generator Operation and Safety Tips
Buyer’s Guide to a Portable Generator
6 Ways to Prepare For Winter Storm
Why Weingartz?
Weingartz, family owned and operated, began in 1945 as a farm supply store for local Michigan families. In the 1970s, we began to focus exclusively on outdoor power equipment. Over time, we morphed into the “power equipment superstore” that now defines all of our locations. The staff and experts at Weingartz work diligently to provide the best service possible and give honest and helpful advice to each and every customer.
Weingartz also sells parts for all outdoor power equipment at https://weingartz.com/parts-lookup.
Weingartz
6585 Dixie Hwy.
Clarkston, MI 48346
(248) 620-5258
info@weingartz.com
Connect With Us!
https://www.facebook.com/WeingartzLawnToSnow
http://pinterest.com/MrWeingartz
Learn More About Specific Honda Generator Models
Sign up for our electronic monthly newsletter for discounts and money-saving tips.
