The job of your fuel filter is to prevent foreign objects such as dirt, debris and water, from entering the combustion chamber of your Exmark. The fuel filter strains the impurities from the fuel before it enters the carburetor. If the filter gets clogged or stops working properly, you will encounter issues with your mower. Here’s how to change the fuel filter on your Exmark Radius E Series zero turn.
Before performing any maintenance on your machine, refer to your owner’s manual for maintenance instructions and safety information. Maintenance instructions vary by model, so depending on your lawn mower model our instructions may vary slightly.
Park your mower on a flat, level surface. Turn the engine off and allow it to cool. Remove the ignition key and disconnect the spark plug ignition wire to prevent accidental starting. Engage the parking brake.
To carry out this task, you’ll need:
- Exmark fuel filter
- Pliers
- Gloves (recommended)
- Safety glasses
- Rags
First, shut off the in-line fuel valve, just turn it a quarter turn. The side of the valve says off, so just turn it to off.
Use a pair of pliers to move both fan clamps off of the fuel filter. We recommend putting a rag underneath the filter to soak up any fuel filter and keep it from running all over your machine. Once the clamps are moved out of the way, give them a twist to break the fuel lines free.
Next, properly dispose of your fuel filter. When installing the new fuel filter, look on the side of the filter to see an arrow that says flow. The flow side should go towards the engine. Reinstall the new fuel filter in the fuel line and then reinstall the fan clamps around the fuel filter.
Turn the fuel valve back on. Make sure to remove any gas-soaked rags out of the machine and then start your mower.
Again, always be aware when working with gasoline, no open flame, no sparks and make sure the battery is disconnected and the key is out of the machine. Refer to your owner’s manual for any further safety operations.
Use our illustrated parts diagrams to locate any replacement parts you may need for maintenance on your Exmark Radius E Series zero turn rider.
You May Also Enjoy These Articles:
Buyer’s Guide to Exmark Radius Zero Turn Riders
How to Change the Engine Oil in a Riding Lawn Mower
Choosing the Best Riding Mower for Your Lawn
How to Level a Riding Lawn Mower Deck
How to Change the Deck Belt on a Riding Lawn Mower
Engine Maintenance Tips for Zero Turn Riders
Why Weingartz?
Weingartz, family owned and operated, began in 1945 as a farm supply store for local Michigan families. In the 1970s, we began to focus exclusively on outdoor power equipment. Over time, we morphed into the “power equipment superstore” that now defines all of our locations. The staff and experts at Weingartz work diligently to provide the best service possible and give honest and helpful advice to each and every customer.
Weingartz also sells parts for all outdoor power equipment at https://weingartz.com/parts-lookup.
Weingartz
32098 Plymouth Road
Livonia, MI 48150
(734) 525-0980
info@weingartz.com
Connect With Us!
https://www.facebook.com/WeingartzLawnToSnow
http://pinterest.com/MrWeingartz
Sign up for our electronic monthly newsletter for discounts and money-saving tips.
